Go to the first, previous, next, last section, table of contents.


6 Updating Existing PO Files

6.1 Invoking the msgmerge Program

msgmerge [option] def.po ref.pot

The msgmerge program merges two Uniforum style .po files together. The def.po file is an existing PO file with translations which will be taken over to the newly created file as long as they still match; comments will be preserved, but extracted comments and file positions will be discarded. The ref.pot file is the last created PO file with up-to-date source references but old translations, or a PO Template file (generally created by xgettext); any translations or comments in the file will be discarded, however dot comments and file positions will be preserved. Where an exact match cannot be found, fuzzy matching is used to produce better results.

6.1.1 Input file location

`def.po´
Translations referring to old sources.
`ref.pot´
References to the new sources.
`-D directory´
`--directory=directory´
Add directory to the list of directories. Source files are searched relative to this list of directories. The resulting `.po´ file will be written relative to the current directory, though.
`-C file´
`--compendium=file´
Specify an additional library of message translations. See section 6.11 Using Translation Compendia. This option may be specified more than once.

6.1.2 Operation mode

`-U´
`--update´
Update def.po. Do nothing if def.po is already up to date.

6.1.3 Output file location

`-o file´
`--output-file=file´
Write output to specified file.

The results are written to standard output if no output file is specified or if it is `-´.

6.1.4 Output file location in update mode

The result is written back to def.po.

`--backup=control´
Make a backup of def.po
`--suffix=suffix´
Override the usual backup suffix.

The version control method may be selected via the --backup option or through the VERSION_CONTROL environment variable. Here are the values:

`none´
`off´
Never make backups (even if --backup is given).
`numbered´
`t´
Make numbered backups.
`existing´
`nil´
Make numbered backups if numbered backups for this file already exist, otherwise make simple backups.
`simple´
`never´
Always make simple backups.

The backup suffix is `~´, unless set with --suffix or the SIMPLE_BACKUP_SUFFIX environment variable.

6.1.5 Operation modifiers

`-m´
`--multi-domain´
Apply ref.pot to each of the domains in def.po.

6.1.6 Output details

`--force-po´
Always write an output file even if it contains no message.
`-i´
`--indent´
Write the .po file using indented style.
`--no-location´
Do not write `#: filename:line´ lines.
`--add-location´
Generate `#: filename:line´ lines (default).
`--strict´
Write out a strict Uniforum conforming PO file. Note that this Uniforum format should be avoided because it doesn't support the GNU extensions.
`-w number´
`--width=number´
Set the output page width. Long strings in the output files will be split across multiple lines in order to ensure that each line's width (= number of screen columns) is less or equal to the given number.
`--no-wrap´
Do not break long message lines. Message lines whose width exceeds the output page width will not be split into several lines. Only file reference lines which are wider than the output page width will be split.
`-s´
`--sort-output´
Generate sorted output. Note that using this option makes it much harder for the translator to understand each message's context.
`-F´
`--sort-by-file´
Sort output by file location.

6.1.7 Informative output

`-h´
`--help´
Display this help and exit.
`-V´
`--version´
Output version information and exit.
`-v´
`--verbose´
Increase verbosity level.
`-q´
`--quiet´
`--silent´
Suppress progress indicators.

6.2 Translated Entries

Each PO file entry for which the msgstr field has been filled with a translation, and which is not marked as fuzzy (see section 6.3 Fuzzy Entries), is said to be a translated entry. Only translated entries will later be compiled by GNU msgfmt and become usable in programs. Other entry types will be excluded; translation will not occur for them.

Some commands are more specifically related to translated entry processing.

t
Find the next translated entry (po-next-translated-entry).
T
Find the previous translated entry (po-previous-translated-entry).

The commands t (po-next-translated-entry) and T (po-previous-translated-entry) move forwards or backwards, chasing for an translated entry. If none is found, the search is extended and wraps around in the PO file buffer.

Translated entries usually result from the translator having edited in a translation for them, section 6.6 Modifying Translations. However, if the variable po-auto-fuzzy-on-edit is not nil, the entry having received a new translation first becomes a fuzzy entry, which ought to be later unfuzzied before becoming an official, genuine translated entry. See section 6.3 Fuzzy Entries.

6.3 Fuzzy Entries

Each PO file entry may have a set of attributes, which are qualities given a name and explicitely associated with the translation, using a special system comment. One of these attributes has the name fuzzy, and entries having this attribute are said to have a fuzzy translation. They are called fuzzy entries, for short.

Fuzzy entries, even if they account for translated entries for most other purposes, usually call for revision by the translator. Those may be produced by applying the program msgmerge to update an older translated PO files according to a new PO template file, when this tool hypothesises that some new msgid has been modified only slightly out of an older one, and chooses to pair what it thinks to be the old translation for the new modified entry. The slight alteration in the original string (the msgid string) should often be reflected in the translated string, and this requires the intervention of the translator. For this reason, msgmerge might mark some entries as being fuzzy.

Also, the translator may decide herself to mark an entry as fuzzy for her own convenience, when she wants to remember that the entry has to be later revisited. So, some commands are more specifically related to fuzzy entry processing.

z
Find the next fuzzy entry (po-next-fuzzy-entry).
Z
Find the previous fuzzy entry (po-previous-fuzzy-entry).
TAB
Remove the fuzzy attribute of the current entry (po-unfuzzy).

The commands z (po-next-fuzzy-entry) and Z (po-previous-fuzzy-entry) move forwards or backwards, chasing for a fuzzy entry. If none is found, the search is extended and wraps around in the PO file buffer.

The command TAB (po-unfuzzy) removes the fuzzy attribute associated with an entry, usually leaving it translated. Further, if the variable po-auto-select-on-unfuzzy has not the nil value, the TAB command will automatically chase for another interesting entry to work on. The initial value of po-auto-select-on-unfuzzy is nil.

The initial value of po-auto-fuzzy-on-edit is nil. However, if the variable po-auto-fuzzy-on-edit is set to t, any entry edited through the RET command is marked fuzzy, as a way to ensure some kind of double check, later. In this case, the usual paradigm is that an entry becomes fuzzy (if not already) whenever the translator modifies it. If she is satisfied with the translation, she then uses TAB to pick another entry to work on, clearing the fuzzy attribute on the same blow. If she is not satisfied yet, she merely uses SPC to chase another entry, leaving the entry fuzzy.

The translator may also use the DEL command (po-fade-out-entry) over any translated entry to mark it as being fuzzy, when she wants to easily leave a trace she wants to later return working at this entry.

Also, when time comes to quit working on a PO file buffer with the q command, the translator is asked for confirmation, if fuzzy string still exists.

6.4 Untranslated Entries

When xgettext originally creates a PO file, unless told otherwise, it initializes the msgid field with the untranslated string, and leaves the msgstr string to be empty. Such entries, having an empty translation, are said to be untranslated entries. Later, when the programmer slightly modifies some string right in the program, this change is later reflected in the PO file by the appearance of a new untranslated entry for the modified string.

The usual commands moving from entry to entry consider untranslated entries on the same level as active entries. Untranslated entries are easily recognizable by the fact they end with `msgstr ""´.

The work of the translator might be (quite naively) seen as the process of seeking for an untranslated entry, editing a translation for it, and repeating these actions until no untranslated entries remain. Some commands are more specifically related to untranslated entry processing.

u
Find the next untranslated entry (po-next-untranslated-entry).
U
Find the previous untranslated entry (po-previous-untransted-entry).
k
Turn the current entry into an untranslated one (po-kill-msgstr).

The commands u (po-next-untranslated-entry) and U (po-previous-untransted-entry) move forwards or backwards, chasing for an untranslated entry. If none is found, the search is extended and wraps around in the PO file buffer.

An entry can be turned back into an untranslated entry by merely emptying its translation, using the command k (po-kill-msgstr). See section 6.6 Modifying Translations.

Also, when time comes to quit working on a PO file buffer with the q command, the translator is asked for confirmation, if some untranslated string still exists.

6.5 Obsolete Entries

By obsolete PO file entries, we mean those entries which are commented out, usually by msgmerge when it found that the translation is not needed anymore by the package being localized.

The usual commands moving from entry to entry consider obsolete entries on the same level as active entries. Obsolete entries are easily recognizable by the fact that all their lines start with #, even those lines containing msgid or msgstr.

Commands exist for emptying the translation or reinitializing it to the original untranslated string. Commands interfacing with the kill ring may force some previously saved text into the translation. The user may interactively edit the translation. All these commands may apply to obsolete entries, carefully leaving the entry obsolete after the fact.

Moreover, some commands are more specifically related to obsolete entry processing.

o
Find the next obsolete entry (po-next-obsolete-entry).
O
Find the previous obsolete entry (po-previous-obsolete-entry).
DEL
Make an active entry obsolete, or zap out an obsolete entry (po-fade-out-entry).

The commands o (po-next-obsolete-entry) and O (po-previous-obsolete-entry) move forwards or backwards, chasing for an obsolete entry. If none is found, the search is extended and wraps around in the PO file buffer.

PO mode does not provide ways for un-commenting an obsolete entry and making it active, because this would reintroduce an original untranslated string which does not correspond to any marked string in the program sources. This goes with the philosophy of never introducing useless msgid values.

However, it is possible to comment out an active entry, so making it obsolete. GNU gettext utilities will later react to the disappearance of a translation by using the untranslated string. The command DEL (po-fade-out-entry) pushes the current entry a little further towards annihilation. If the entry is active (it is a translated entry), then it is first made fuzzy. If it is already fuzzy, then the entry is merely commented out, with confirmation. If the entry is already obsolete, then it is completely deleted from the PO file. It is easy to recycle the translation so deleted into some other PO file entry, usually one which is untranslated. See section 6.6 Modifying Translations.

Here is a quite interesting problem to solve for later development of PO mode, for those nights you are not sleepy. The idea would be that PO mode might become bright enough, one of these days, to make good guesses at retrieving the most probable candidate, among all obsolete entries, for initializing the translation of a newly appeared string. I think it might be a quite hard problem to do this algorithmically, as we have to develop good and efficient measures of string similarity. Right now, PO mode completely lets the decision to the translator, when the time comes to find the adequate obsolete translation, it merely tries to provide handy tools for helping her to do so.

6.6 Modifying Translations

PO mode prevents direct modification of the PO file, by the usual means Emacs gives for altering a buffer's contents. By doing so, it pretends helping the translator to avoid little clerical errors about the overall file format, or the proper quoting of strings, as those errors would be easily made. Other kinds of errors are still possible, but some may be caught and diagnosed by the batch validation process, which the translator may always trigger by the V command. For all other errors, the translator has to rely on her own judgment, and also on the linguistic reports submitted to her by the users of the translated package, having the same mother tongue.

When the time comes to create a translation, correct an error diagnosed mechanically or reported by a user, the translators have to resort to using the following commands for modifying the translations.

RET
Interactively edit the translation (po-edit-msgstr).
LFD
C-j
Reinitialize the translation with the original, untranslated string (po-msgid-to-msgstr).
k
Save the translation on the kill ring, and delete it (po-kill-msgstr).
w
Save the translation on the kill ring, without deleting it (po-kill-ring-save-msgstr).
y
Replace the translation, taking the new from the kill ring (po-yank-msgstr).

The command RET (po-edit-msgstr) opens a new Emacs window meant to edit in a new translation, or to modify an already existing translation. The new window contains a copy of the translation taken from the current PO file entry, all ready for edition, expunged of all quoting marks, fully modifiable and with the complete extent of Emacs modifying commands. When the translator is done with her modifications, she may use C-c C-c to close the subedit window with the automatically requoted results, or C-c C-k to abort her modifications. See section 6.8 Details of Sub Edition, for more information.

The command LFD (po-msgid-to-msgstr) initializes, or reinitializes the translation with the original string. This command is normally used when the translator wants to redo a fresh translation of the original string, disregarding any previous work.

It is possible to arrange so, whenever editing an untranslated entry, the LFD command be automatically executed. If you set po-auto-edit-with-msgid to t, the translation gets initialised with the original string, in case none exists already. The default value for po-auto-edit-with-msgid is nil.

In fact, whether it is best to start a translation with an empty string, or rather with a copy of the original string, is a matter of taste or habit. Sometimes, the source language and the target language are so different that is simply best to start writing on an empty page. At other times, the source and target languages are so close that it would be a waste to retype a number of words already being written in the original string. A translator may also like having the original string right under her eyes, as she will progressively overwrite the original text with the translation, even if this requires some extra editing work to get rid of the original.

The command k (po-kill-msgstr) merely empties the translation string, so turning the entry into an untranslated one. But while doing so, its previous contents is put apart in a special place, known as the kill ring. The command w (po-kill-ring-save-msgstr) has also the effect of taking a copy of the translation onto the kill ring, but it otherwise leaves the entry alone, and does not remove the translation from the entry. Both commands use exactly the Emacs kill ring, which is shared between buffers, and which is well known already to Emacs lovers.

The translator may use k or w many times in the course of her work, as the kill ring may hold several saved translations. From the kill ring, strings may later be reinserted in various Emacs buffers. In particular, the kill ring may be used for moving translation strings between different entries of a single PO file buffer, or if the translator is handling many such buffers at once, even between PO files.

To facilitate exchanges with buffers which are not in PO mode, the translation string put on the kill ring by the k command is fully unquoted before being saved: external quotes are removed, multi-line strings are concatenated, and backslash escaped sequences are turned into their corresponding characters. In the special case of obsolete entries, the translation is also uncommented prior to saving.

The command y (po-yank-msgstr) completely replaces the translation of the current entry by a string taken from the kill ring. Following Emacs terminology, we then say that the replacement string is yanked into the PO file buffer. See section `Yanking' in The Emacs Editor. The first time y is used, the translation receives the value of the most recent addition to the kill ring. If y is typed once again, immediately, without intervening keystrokes, the translation just inserted is taken away and replaced by the second most recent addition to the kill ring. By repeating y many times in a row, the translator may travel along the kill ring for saved strings, until she finds the string she really wanted.

When a string is yanked into a PO file entry, it is fully and automatically requoted for complying with the format PO files should have. Further, if the entry is obsolete, PO mode then appropriately push the inserted string inside comments. Once again, translators should not burden themselves with quoting considerations besides, of course, the necessity of the translated string itself respective to the program using it.

Note that k or w are not the only commands pushing strings on the kill ring, as almost any PO mode command replacing translation strings (or the translator comments) automatically saves the old string on the kill ring. The main exceptions to this general rule are the yanking commands themselves.

To better illustrate the operation of killing and yanking, let's use an actual example, taken from a common situation. When the programmer slightly modifies some string right in the program, his change is later reflected in the PO file by the appearance of a new untranslated entry for the modified string, and the fact that the entry translating the original or unmodified string becomes obsolete. In many cases, the translator might spare herself some work by retrieving the unmodified translation from the obsolete entry, then initializing the untranslated entry msgstr field with this retrieved translation. Once this done, the obsolete entry is not wanted anymore, and may be safely deleted.

When the translator finds an untranslated entry and suspects that a slight variant of the translation exists, she immediately uses m to mark the current entry location, then starts chasing obsolete entries with o, hoping to find some translation corresponding to the unmodified string. Once found, she uses the DEL command for deleting the obsolete entry, knowing that DEL also kills the translation, that is, pushes the translation on the kill ring. Then, r returns to the initial untranslated entry, and y then yanks the saved translation right into the msgstr field. The translator is then free to use RET for fine tuning the translation contents, and maybe to later use u, then m again, for going on with the next untranslated string.

When some sequence of keys has to be typed over and over again, the translator may find it useful to become better acquainted with the Emacs capability of learning these sequences and playing them back under request. See section `Keyboard Macros' in The Emacs Editor.

6.7 Modifying Comments

Any translation work done seriously will raise many linguistic difficulties, for which decisions have to be made, and the choices further documented. These documents may be saved within the PO file in form of translator comments, which the translator is free to create, delete, or modify at will. These comments may be useful to herself when she returns to this PO file after a while.

Comments not having whitespace after the initial `#´, for example, those beginning with `#.´ or `#:´, are not translator comments, they are exclusively created by other gettext tools. So, the commands below will never alter such system added comments, they are not meant for the translator to modify. See section 2.2 The Format of PO Files.

The following commands are somewhat similar to those modifying translations, so the general indications given for those apply here. See section 6.6 Modifying Translations.

#
Interactively edit the translator comments (po-edit-comment).
K
Save the translator comments on the kill ring, and delete it (po-kill-comment).
W
Save the translator comments on the kill ring, without deleting it (po-kill-ring-save-comment).
Y
Replace the translator comments, taking the new from the kill ring (po-yank-comment).

These commands parallel PO mode commands for modifying the translation strings, and behave much the same way as they do, except that they handle this part of PO file comments meant for translator usage, rather than the translation strings. So, if the descriptions given below are slightly succinct, it is because the full details have already been given. See section 6.6 Modifying Translations.

The command # (po-edit-comment) opens a new Emacs window containing a copy of the translator comments on the current PO file entry. If there are no such comments, PO mode understands that the translator wants to add a comment to the entry, and she is presented with an empty screen. Comment marks (#) and the space following them are automatically removed before edition, and reinstated after. For translator comments pertaining to obsolete entries, the uncommenting and recommenting operations are done twice. Once in the editing window, the keys C-c C-c allow the translator to tell she is finished with editing the comment. See section 6.8 Details of Sub Edition, for further details.

Functions found on po-subedit-mode-hook, if any, are executed after the string has been inserted in the edit buffer.

The command K (po-kill-comment) gets rid of all translator comments, while saving those comments on the kill ring. The command W (po-kill-ring-save-comment) takes a copy of the translator comments on the kill ring, but leaves them undisturbed in the current entry. The command Y (po-yank-comment) completely replaces the translator comments by a string taken at the front of the kill ring. When this command is immediately repeated, the comments just inserted are withdrawn, and replaced by other strings taken along the kill ring.

On the kill ring, all strings have the same nature. There is no distinction between translation strings and translator comments strings. So, for example, let's presume the translator has just finished editing a translation, and wants to create a new translator comment to document why the previous translation was not good, just to remember what was the problem. Foreseeing that she will do that in her documentation, the translator may want to quote the previous translation in her translator comments. To do so, she may initialize the translator comments with the previous translation, still at the head of the kill ring. Because editing already pushed the previous translation on the kill ring, she merely has to type M-w prior to #, and the previous translation will be right there, all ready for being introduced by some explanatory text.

On the other hand, presume there are some translator comments already and that the translator wants to add to those comments, instead of wholly replacing them. Then, she should edit the comment right away with #. Once inside the editing window, she can use the regular Emacs commands C-y (yank) and M-y (yank-pop) to get the previous translation where she likes.

6.8 Details of Sub Edition

The PO subedit minor mode has a few peculiarities worth being described in fuller detail. It installs a few commands over the usual editing set of Emacs, which are described below.

C-c C-c
Complete edition (po-subedit-exit).
C-c C-k
Abort edition (po-subedit-abort).
C-c C-a
Consult auxiliary PO files (po-subedit-cycle-auxiliary).

The window's contents represents a translation for a given message, or a translator comment. The translator may modify this window to her heart's content. Once this is done, the command C-c C-c (po-subedit-exit) may be used to return the edited translation into the PO file, replacing the original translation, even if it moved out of sight or if buffers were switched.

If the translator becomes unsatisfied with her translation or comment, to the extent she prefers keeping what was existent prior to the RET or # command, she may use the command C-c C-k (po-subedit-abort) to merely get rid of edition, while preserving the original translation or comment. Another way would be for her to exit normally with C-c C-c, then type U once for undoing the whole effect of last edition.

The command C-c C-a (po-subedit-cycle-auxiliary) allows for glancing through translations already achieved in other languages, directly while editing the current translation. This may be quite convenient when the translator is fluent at many languages, but of course, only makes sense when such completed auxiliary PO files are already available to her (see section 6.10 Consulting Auxiliary PO Files).

Functions found on po-subedit-mode-hook, if any, are executed after the string has been inserted in the edit buffer.

While editing her translation, the translator should pay attention to not inserting unwanted RET (newline) characters at the end of the translated string if those are not meant to be there, or to removing such characters when they are required. Since these characters are not visible in the editing buffer, they are easily introduced by mistake. To help her, RET automatically puts the character < at the end of the string being edited, but this < is not really part of the string. On exiting the editing window with C-c C-c, PO mode automatically removes such < and all whitespace added after it. If the translator adds characters after the terminating <, it looses its delimiting property and integrally becomes part of the string. If she removes the delimiting <, then the edited string is taken as is, with all trailing newlines, even if invisible. Also, if the translated string ought to end itself with a genuine <, then the delimiting < may not be removed; so the string should appear, in the editing window, as ending with two < in a row.

When a translation (or a comment) is being edited, the translator may move the cursor back into the PO file buffer and freely move to other entries, browsing at will. If, with an edition pending, the translator wanders in the PO file buffer, she may decide to start modifying another entry. Each entry being edited has its own subedit buffer. It is possible to simultaneously edit the translation and the comment of a single entry, or to edit entries in different PO files, all at once. Typing RET on a field already being edited merely resumes that particular edit. Yet, the translator should better be comfortable at handling many Emacs windows!

Pending subedits may be completed or aborted in any order, regardless of how or when they were started. When many subedits are pending and the translator asks for quitting the PO file (with the q command), subedits are automatically resumed one at a time, so she may decide for each of them.

6.9 C Sources Context

PO mode is particularily powerful when used with PO files created through GNU gettext utilities, as those utilities insert special comments in the PO files they generate. Some of these special comments relate the PO file entry to exactly where the untranslated string appears in the program sources.

When the translator gets to an untranslated entry, she is fairly often faced with an original string which is not as informative as it normally should be, being succinct, cryptic, or otherwise ambiguous. Before chosing how to translate the string, she needs to understand better what the string really means and how tight the translation has to be. Most of times, when problems arise, the only way left to make her judgment is looking at the true program sources from where this string originated, searching for surrounding comments the programmer might have put in there, and looking around for helping clues of any kind.

Surely, when looking at program sources, the translator will receive more help if she is a fluent programmer. However, even if she is not versed in programming and feels a little lost in C code, the translator should not be shy at taking a look, once in a while. It is most probable that she will still be able to find some of the hints she needs. She will learn quickly to not feel uncomfortable in program code, paying more attention to programmer's comments, variable and function names (if he dared chosing them well), and overall organization, than to programmation itself.

The following commands are meant to help the translator at getting program source context for a PO file entry.

s
Resume the display of a program source context, or cycle through them (po-cycle-source-reference).
M-s
Display of a program source context selected by menu (po-select-source-reference).
S
Add a directory to the search path for source files (po-consider-source-path).
M-S
Delete a directory from the search path for source files (po-ignore-source-path).

The commands s (po-cycle-source-reference) and M-s (po-select-source-reference) both open another window displaying some source program file, and already positioned in such a way that it shows an actual use of the string to be translated. By doing so, the command gives source program context for the string. But if the entry has no source context references, or if all references are unresolved along the search path for program sources, then the command diagnoses this as an error.

Even if s (or M-s) opens a new window, the cursor stays in the PO file window. If the translator really wants to get into the program source window, she ought to do it explicitly, maybe by using command O.

When s is typed for the first time, or for a PO file entry which is different of the last one used for getting source context, then the command reacts by giving the first context available for this entry, if any. If some context has already been recently displayed for the current PO file entry, and the translator wandered off to do other things, typing s again will merely resume, in another window, the context last displayed. In particular, if the translator moved the cursor away from the context in the source file, the command will bring the cursor back to the context. By using s many times in a row, with no other commands intervening, PO mode will cycle to the next available contexts for this particular entry, getting back to the first context once the last has been shown.

The command M-s behaves differently. Instead of cycling through references, it lets the translator choose a particular reference among many, and displays that reference. It is best used with completion, if the translator types TAB immediately after M-s, in response to the question, she will be offered a menu of all possible references, as a reminder of which are the acceptable answers. This command is useful only where there are really many contexts available for a single string to translate.

Program source files are usually found relative to where the PO file stands. As a special provision, when this fails, the file is also looked for, but relative to the directory immediately above it. Those two cases take proper care of most PO files. However, it might happen that a PO file has been moved, or is edited in a different place than its normal location. When this happens, the translator should tell PO mode in which directory normally sits the genuine PO file. Many such directories may be specified, and all together, they constitute what is called the search path for program sources. The command S (po-consider-source-path) is used to interactively enter a new directory at the front of the search path, and the command M-S (po-ignore-source-path) is used to select, with completion, one of the directories she does not want anymore on the search path.

6.10 Consulting Auxiliary PO Files

PO mode is able to help the knowledgeable translator, being fluent in many languages, at taking advantage of translations already achieved in other languages she just happens to know. It provides these other language translations as additional context for her own work. Moreover, it has features to ease the production of translations for many languages at once, for translators preferring to work in this way.

An auxiliary PO file is an existing PO file meant for the same package the translator is working on, but targeted to a different mother tongue language. Commands exist for declaring and handling auxiliary PO files, and also for showing contexts for the entry under work.

Here are the auxiliary file commands available in PO mode.

a
Seek auxiliary files for another translation for the same entry (po-cycle-auxiliary).
C-c C-a
Switch to a particular auxiliary file (po-select-auxiliary).
A
Declare this PO file as an auxiliary file (po-consider-as-auxiliary).
M-A
Remove this PO file from the list of auxiliary files (po-ignore-as-auxiliary).

Command A (po-consider-as-auxiliary) adds the current PO file to the list of auxiliary files, while command M-A (po-ignore-as-auxiliary just removes it.

The command a (po-cycle-auxiliary) seeks all auxiliary PO files, round-robin, searching for a translated entry in some other language having an msgid field identical as the one for the current entry. The found PO file, if any, takes the place of the current PO file in the display (its window gets on top). Before doing so, the current PO file is also made into an auxiliary file, if not already. So, a in this newly displayed PO file will seek another PO file, and so on, so repeating a will eventually yield back the original PO file.

The command C-c C-a (po-select-auxiliary) asks the translator for her choice of a particular auxiliary file, with completion, and then switches to that selected PO file. The command also checks if the selected file has an msgid field identical as the one for the current entry, and if yes, this entry becomes current. Otherwise, the cursor of the selected file is left undisturbed.

For all this to work fully, auxiliary PO files will have to be normalized, in that way that msgid fields should be written exactly the same way. It is possible to write msgid fields in various ways for representing the same string, different writing would break the proper behaviour of the auxiliary file commands of PO mode. This is not expected to be much a problem in practice, as most existing PO files have their msgid entries written by the same GNU gettext tools.

However, PO files initially created by PO mode itself, while marking strings in source files, are normalised differently. So are PO files resulting of the the `M-x normalize´ command. Until these discrepancies between PO mode and other GNU gettext tools get fully resolved, the translator should stay aware of normalisation issues.

6.11 Using Translation Compendia

A compendium is a special PO file containing a set of translations recurring in many different packages. The translator can use gettext tools to build a new compendium, to add entries to her compendium, and to initialize untranslated entries, or to update already translated entries, from translations kept in the compendium.

6.11.1 Creating Compendia

Basically every PO file consisting of translated entries only can be declared as a valid compendium. Often the translator wants to have special compendia; let's consider two cases: concatenating PO files and extracting a message subset from a PO file.

6.11.1.1 Concatenate PO Files

To concatenate several valid PO files into one compendium file you can use `msgcomm´ or `msgcat´ (the latter preferred):

msgcat -o compendium.po file1.po file2.po

By default, msgcat will accumulate divergent translations for the same string. Those occurences will be marked as fuzzy and highly visible decorated; calling msgcat on `file1.po´:

#: src/hello.c:200
#, c-format
msgid "Report bugs to <%s>.\n"
msgstr "Comunicar `bugs' a <%s>.\n"

and `file2.po´:

#: src/bye.c:100
#, c-format
msgid "Report bugs to <%s>.\n"
msgstr "Comunicar \"bugs\" a <%s>.\n"

will result in:

#: src/hello.c:200 src/bye.c:100
#, fuzzy, c-format
msgid "Report bugs to <%s>.\n"
msgstr ""
"#-#-#-#-#  file1.po  #-#-#-#-#\n"
"Comunicar `bugs' a <%s>.\n"
"#-#-#-#-#  file2.po  #-#-#-#-#\n"
"Comunicar \"bugs\" a <%s>.\n"

The translator will have to resolve this "conflict" manually; she has to decide whether the first or the second version is appropriate (or provide a new translation), to delete the "marker lines", and finally to remove the fuzzy mark.

If the translator knows in advance the first found translation of a message is always the best translation she can make use to the `--use-first´ switch:

msgcat --use-first -o compendium.po file1.po file2.po

A good compendium file must not contain fuzzy or untranslated entries. If input files are "dirty" you must preprocess the input files or postprocess the result using `msgattrib --translated --no-fuzzy´.

6.11.1.2 Extract a Message Subset from a PO File

Nobody wants to translate the same messages again and again; thus you may wish to have a compendium file containing `getopt.c´ messages.

To extract a message subset (e.g., all `getopt.c´ messages) from an existing PO file into one compendium file you can use `msggrep´:

msggrep --location src/getopt.c -o compendium.po file.po

6.11.2 Using Compendia

You can use a compendium file to initialize a translation from scratch or to update an already existing translation.

6.11.2.1 Initialize a New Translation File

Since a PO file with translations does not exist the translator can merely use `/dev/null´ to fake the "old" translation file.

msgmerge --compendium compendium.po -o file.po /dev/null file.pot

6.11.2.2 Update an Existing Translation File

Concatenate the compendium file(s) and the existing PO, merge the result with the POT file and remove the obsolete entries (optional, here done using `sed´):

msgcat --use-first -o update.po compendium1.po compendium2.po file.po
msgmerge update.po file.pot | sed -e '/^#~/d' > file.po


Go to the first, previous, next, last section, table of contents.